For many years there was only 1 dependable way for you to keep data on your personal computer – having a hard disk drive (HDD). On the other hand, this kind of technology is actually showing its age – hard drives are actually noisy and sluggish; they are power–hungry and are likely to generate a great deal of warmth throughout serious operations.

SSD drives, however, are extremely fast, take in a lesser amount of power and tend to be much cooler. They provide a completely new strategy to file accessibility and storage and are years in advance of HDDs with regards to file read/write speed, I/O effectiveness and also power efficiency. See how HDDs stand up up against the more recent SSD drives.

1. Access Time

Image

After the launch of SSD drives, data access speeds have gone through the roof. Due to the brand–new electronic interfaces utilised in SSD drives, the common data file access time has been reduced towards a all–time low of 0.1millisecond.

Image

The technology powering HDD drives goes back to 1954. And even though it’s been substantially refined over time, it’s nonetheless can’t stand up to the imaginative technology powering SSD drives. Through today’s HDD drives, the best data file access rate you are able to attain can vary somewhere between 5 and 8 milliseconds.

2. Random I/O Performance

Image

Thanks to the very same revolutionary technique which allows for better access times, you can also benefit from greater I/O efficiency with SSD drives. They will conduct double as many operations throughout a given time when compared with an HDD drive.

An SSD can deal with at the very least 6000 IO’s per second.

Image

With an HDD drive, the I/O performance progressively improves the more you employ the disk drive. Even so, just after it actually reaches a particular restriction, it can’t get quicker. And due to the now–old technology, that I/O limitation is significantly lower than what you could find with an SSD.

HDD are only able to go as much as 400 IO’s per second.

3. Reliability

Image

SSD drives do not have any kind of moving components, which means there’s a lot less machinery inside them. And the less actually moving parts there are, the lower the probability of failing can be.

The normal rate of failure of any SSD drive is 0.5%.

Image

As we have mentioned, HDD drives rely on rotating disks. And something that utilizes many moving elements for lengthy time periods is at risk of failing.

HDD drives’ average rate of failing ranges somewhere between 2% and 5%.

4. Energy Conservation

Image

SSDs don’t have moving components and need minimal cooling down power. In addition, they involve a small amount of power to perform – trials have established they can be operated by a regular AA battery.

In general, SSDs consume between 2 and 5 watts.

Image

HDD drives are famous for becoming noisy. They demand a lot more electrical power for air conditioning reasons. On a hosting server which has lots of HDDs running at all times, you need a lot of fans to make sure they’re cooler – this will make them a lot less energy–efficient than SSD drives.

HDDs take in in between 6 and 15 watts.

5. CPU Power

Image

SSD drives provide for swifter file access speeds, which, in turn, enable the processor to complete data file queries considerably quicker and then to return to different duties.

The standard I/O wait for SSD drives is barely 1%.

Image

If you use an HDD, you need to devote extra time watching for the outcome of one’s file call. It means that the CPU will remain idle for extra time, looking forward to the HDD to reply.

The average I/O wait for HDD drives is about 7%.

6.Input/Output Request Times

Image

It’s about time for some real–world instances. We competed an entire system backup with a hosting server only using SSDs for file storage purposes. In that process, the regular service time for an I/O request stayed beneath 20 ms.

Image

Using the same web server, however, this time loaded with HDDs, the end results were totally different. The normal service time for an I/O query fluctuated between 400 and 500 ms.

7. Backup Rates

Image

Discussing backups and SSDs – we have discovered an effective enhancement in the backup rate as we transferred to SSDs. Currently, a normal server back up takes simply 6 hours.

Image

Over time, we have got employed principally HDD drives with our servers and we’re familiar with their functionality. With a server pre–loaded with HDD drives, a complete server back–up normally takes about 20 to 24 hours.

Should you want to straight away boost the general performance of your respective web sites without the need to adjust just about any code, an SSD–equipped website hosting solution will be a great solution. Check our website hosting packages and also our VPS servers – these hosting services have extremely fast SSD drives and are available at good prices.

  • Service guarantees

  •  
  • Each of our Virtual Private Servers is setup for you free of cost. 99.9% network uptime. Full SSH/full root access.

  • Compare our prices

  •  
  • Take a look at our price list and select the perfect Virtual Private Server for your powerful web sites. It is easy to move up to a more powerful VPS Web Hosting configuration with a click.
  • Compare our hosting plans

  • Contact Us

  •  
  • Contact us 24/7 by email or by utilizing the really–fast ticketing platform. Our technicians are prepared to respond to any of your inquiries within just 60 minutes.